3BATT (battery) indicator

This indicator starts flashing when the battery connected to the camcorder has fallen, and stays lit when the battery is exhausted.

To prevent interruption during operation, replace the battery as soon as 2 this indicator starts flashing.

The level at which the indicator starts flashing can be set on the BATTERY page of the MAINTENANCE menu.

For details, see the Maintenance Manual.

4 (warning) indicator

This indicator lights up when the camcorder is used under one or more of the following conditions and if the corresponding items have been set to ON on the ‘!’ LED page of the USER menu.

•The gain is set to anything but 0 dB.

•The SHUTTER selector is ON.

•The WHITE BAL switch is set to PRST.

•ATW is being used.

•The lens extender is used.

•The FILTER selector is set to anything but ND:1/CC:A.

•The reference value of the auto iris adjustment is anything but the standard value.

Note

For an HDW-750P which operates with the 25PsF format, this indicator functions as follows.

For the 1/50 shutter speed, this indicator does not light even when the SHUTTER selector is set to ON.

For a shutter speed other than 1/50, this indicator lights up when the SHUTTER selector is set to ON.

5VTR SAVE indicator

Lights up when the VTR section is set to power save mode by setting the VTR SAVE/STBY switch to SAVE.

Chapter 2 Locations and Functions of Parts and Controls 2-47