When using an |
|
down converting |
|
Connect the color video monitor to the TEST OUT connector or VBS/ |
|
SDI OUT connector of the camcorder (when an |
|
installed). By pressing the PLAY button, you can view the recorded |
|
picture. | 3 |
The signal output from each connector depends on the menu settings. |
For detailed information, see
NTSC/PAL monitor | |
| |
| SDI input |
| connector or |
| video input |
| connector a) |
Video input | VBS/SDI OUT a) |
connector b) | TEST OUT b) |
a)As the output signal from the VBS/SDI OUT connector, when SDI is selected on the OUTPUT SEL page of the USER menu, connect to the SDI input connector. When VBS is selected, connect to the video input connector.
Note
When REAR BNC OUT SEL is set to OFF on the OUTPUT SEL page of the USER menu, the signal is not output from the VBS/SDI OUT connector.
For detailed information, see
Signals” on page
b)When SD is selected as the output signal from the TEST OUT connector, connect to the video input connector.
Color playback
Chapter 3 Recording and Playback