b) When SDI is selected, connect the VBS/SDI OUT connector to |
|
the SDI IN connector of the monitor. |
|
When VBS is selected, connect the VBS/SDI OUT connector to |
|
the VIDEO IN connector of the monitor. |
|
c) If you connect the TEST OUT connector to the monitor by |
|
setting TEST OUT SELECT to SD, the down converter |
|
automatically operates even if REAR BNC OUT SEL is set to |
|
OFF. |
|
d) When no picture is displayed on the monitor with the TEST | 4 |
OUT connector feeding the monitor, make sure the type of | |
monitor (HD monitor / NTSC/PAL monitor) and the signal |
|
format of the output signal of the camcorder (1080i/525i/625i) |
|
match. |
|
e)When the NTSC/PAL viewfinder or NTSC/PAL monitor is connected, the markers and zebra patterns are not displayed when CROP is selected.
3 Turn the MENU knob to move the t mark to the item you want to set, and push the MENU knob.
The t mark at the left of the selected item changes to a z mark and the z mark at the left of the setting changes to a ? mark.
4 Turn the MENU knob to change the desired setting, and push the MENU knob.
The z mark at the left of the selected item changes to a t mark and the ? mark at the left of the setting changes to a z mark.
To continue the setting of another output signal, repeat steps 3 and 4.
5 To end menu operations, turn the MENU ON/OFF switch to OFF, or close the cover.
Chapter 4 Adjustments and Settings for Recording