(6)Checking the XLR connection automatic detection function
Before starting to check, remove the microphone connected to the MIC IN connector if it is connected.
1 Perform operations of steps 1 and 2 explained in “(5) Testing external microphones”.
2 Set the AUDIO IN switches to FRONT.
3 Perform operations of steps 4 and 5 explained in “(5) Testing external microphones”.
When performing the operation of step 5 in “(5) Testing external | 6 |
| |
microphones”, if the audio level meters in the display panel and |
|
audio level indicators in the viewfinder reflect the changing sound |
|
level, the function of the XLR connection automatic detection works |
|
correctly. |
|
If it does not reflect the changing sound level, the function of the |
|
XLR connection automatic detection is set to OFF. Set REAR XLR |
|
AUTO to ON on the VTR MODE 1 page of the MAINTENANCE |
|
menu. |
|
If it does not reflect even after you set REAR XLR AUTO to ON, |
|
the XLR connection automatic detection function does not work |
|
correctly. |
|
(Continued)
Chapter 6 Maintenance |