qg SHUTTER selector

Set this selector to ON to use the electronic shutter. Set it to SEL to switch the shutter speed or mode setting within the range that has been

2 previously set from the setup menu.

When this selector is adjusted, the new setting will be indicated on the setting change/adjustment progress message display area for about 3 seconds.

For more information about the shutter speed and mode settings, see “4-2 Setting the Electronic Shutter” on page 4-12.

qh AUTO W/B BAL (automatic white/black balance adjustment) switch

This switch activates the white balance and black balance automatic adjustment functions.

WHT: Automatic adjustment of the white balance. If the WHITE BAL switch is set to A or B, the white balance setting is stored in the corresponding memory. The memory can store the white balance setting for each CC filter.

BLK: Automatic adjustment of the black set and black balance.

qj ASSIGN (assignable) switches 1/2

You can assign the desired functions to each of ASSIGN 1 switch (push- type) and ASSIGN 2 switch (slide-type) on the FUNCTION 1 page of the USER menu.

For details, see “4-8-5 Assigning Functions to ASSIGN 1/2 Switches” on page 4- 109.

qk GAIN selector

This selector switches the gain of the video amplifier to match the lighting conditions during shooting. The gains corresponding to the L, M, and H settings are selected from the setup menu before use. The factory settings are L = 0 dB, M = 6 dB, and H = 12 dB.

When this selector is adjusted, the new setting will be indicated on the

2-20Chapter 2 Locations and Functions of Parts and Controls