Setting the Auto Interval Rec mode

To record in Auto Interval Rec mode, you need to turn on Auto Interval Rec and set the total time from starting to finishing shooting (TAKE TOTAL TIME) and time to be recorded on the tape (REC TIME), using the USER menu.

 

3

Notes

•To make settings for Auto Interval Rec mode, set TAKE TOTAL TIME first, then REC TIME.

•To turn on the light automatically before starting recording by setting the PRE-LIGHTING item to ON, be sure to set the LIGHT switch to AUTO. Also, set the switch of the light connected to the LIGHT connector to on.

Follow the procedure below to turn on Auto Interval Rec mode

MENU knob

MENU ON/OFF switch

Switches to be used for setting the Auto Interval Rec mode

1 Set the MENU ON/OFF switch to ON.

The page that was on the viewfinder screen when the last menu operation ended will appear again.

(Continued)

Chapter 3 Recording and Playback 3-29