4 Turn the MENU knob to move the t mark to PRE-LIGHTING.

3

5 Push the MENU knob.

The t mark at the left of PRE-LIGHTING changes to a z mark and the z mark at the left of the setting changes to a ? mark.

6 Turn the MENU knob clockwise or counterclockwise until the desired time interval to turn on the light before recording starts appears.

If you turn the MENU knob clockwise or counterclockwise, the PRE-LIGHTING time changes in the following sequence: OFF y 2SEC y 5SEC y 10SEC.

Notes

To turn on the light automatically before recording starts by setting the PRE-LIGHTING item to ON, be sure to set the LIGHT switch to AUTO. Also, set the switch of the light connected to the LIGHT connector to ON.

The light automatically turns on and off in the continuous trigger mode of the Manual Interval Rec mode. However, if the duration when the light should be off is less than 5 seconds, the light is on continuously.

(Continued)

Chapter 3 Recording and Playback 3-47