5-5-4 Connecting Line Input Audio Equipment

Connect the audio output connector of the audio equipment that supplies the line input signal to the AUDIO IN CH-1 or CH-2 connector.

 

 

Set the LINE/MIC/

 

 

+48 V ON switch for the

5

 

channel to which the

 

audio signal source is

 

connected to LINE.

 

 

Audio equipment

AUDIO IN switch: At the factory setting,

 

when the audio cable is connected

AUDIO IN for CH-1

to either the AUDIO IN CH-1 or CH-2 connector,

or CH-2

the signal input to the AUDIO IN CH-1 or CH-2

 

connector is automatically selected as the

 

signal to be recorded. This is true regardless of

 

the AUDIO IN switch setting. (This is called XLR

 

connection automatic detection function.)

 

When the XLR connection automatic detection

 

function is set to OFF on the VTR MODE 1 page

 

of the MAINTENANCE menu, set the AUDIO IN

 

switch corresponding to the

channel to which

 

the audio equipment is connected to REAR.

 

Line input connection

5-28Chapter 5 Setting Up the Camcorder