Note
AUDIO IN CH-1 and CH-2 are female XLR (3-pin) connectors. When the microphone cable connector is female, use a converting adaptor.
Using an external microphone attached to the camcorder
You can attach an external microphone to the camcorder by using the CAC-12 Microphone Holder (not supplied). Additionally, by using the CRS-3P Cradle Suspension (not supplied), you can reduce the mechanical vibration noise from the VTR, and can also attach a long microphone. Note, however, that use of the CRS-3P requires a
5 microphone holder (A) (Part No. 3-680-581-01), which is not supplied with the CRS-3P.
The procedure for attaching an external microphone using a CAC-12 and CRS-3P is shown below.
For more information, refer to the manual supplied with the microphone holder or cradle suspension manual.
1 Assemble the CRS-3P Cradle Suspension and microphone holder
(A) (Part No. 3-680-581-01).
Microphone holder (A) (Part No. 3-680-581-01)
CRS-3P Cradle Suspension
5-20Chapter 5 Setting Up the Camcorder
