Refitting the eyepiece

1 Align the match mark on the eyepiece locking ring with that on the viewfinder barrel.

2 Align the match mark on the end of the eyepiece with that of the eyepiece locking ring, then insert the eyepiece into the viewfinder barrel.

5

Match mark on the end of eyepiece

3 Turn the eyepiece locking ring clockwise until its “LOCK” indication arrow points to the match mark on the viewfinder barrel.

Note

When the eyecup is worn out, replace it with a new one (service part number 3-723-079-03).

Chapter 5 Setting Up the Camcorder 5-13