2

Shooting and recording/playback functions (3)

ws VBS/SDI OUT (video signal output) connector (BNC type) (Only when an HKDW-702 extension board (not supplied) is installed)

In this manual, the illustration of the camcorder which the BNC connector is attached is used. If you do not install an HKDW-702, ignore this connector.

This connector outputs down-converted 525i/625i signals (75-ohm terminated) to the video monitor. The output signal can be selected as analog composite or SDI. Refer to the FUNCTION 1 page of the USER menu. Selecting OFF stops the converter.

For instructions on how to select the output signal, see “4-8-2 Selecting the Output Signals” on page 4-101.

Chapter 2 Locations and Functions of Parts and Controls 2-23