When you select the file No. where the data has been saved:

 

The message “OVERWRITE OK YES NO” appears. In this

 

case, the t mark is placed at the left of NO, and NO blinks.

 

To stop overwriting, press the MENU knob. Repeat step 2.

 

To overwrite, move the t mark to YES (YES blinks) and push

 

the MENU knob.

 

You can select the contents of the user file to be displayed on the

4

page.

For details, see “Selecting the display contents” on page 4-144.

 

 

4 To end menu operations, set the MENU ON/OFF switch to OFF, or close the cover.

To return to the SCENE FILE page

After the message “COMPLETE!” is displayed in step 3, move the

tmark to ESC at the right top of the window by turning the MENU knob and push the MENU knob.

The SCENE FILE page appears again.

Data of the white balance to be stored in the scene file

Data of the white balance to be stored in the scene file depends on the setting of SCENE WHITE DATA on the REFERENCE page of the FILE menu.

4-140Chapter 4 Adjustments and Settings for Recording