2 Adjust the FILTER selector to suit the lighting conditions.
| ND filter |
| CC filter |
|
|
|
|
1 | Clear | A | Cross filter |
|
|
|
|
2 | 1/4 ND | B | 3200K |
|
|
|
|
3 | 1/16 ND | C | 4300K |
|
|
|
|
4 | 1/64 ND | D | 6300K |
|
|
|
|
If the setting of the FILTER selector is changed, a message reporting
the set position appears for about 3 seconds in the setting change and 4 adjustment progress message display area of the viewfinder screen
(in display mode 3).
3 Place a white test card under the same lighting conditions as the subject to be shot and zoom up to it. Alternately, any white object such as a cloth or a wall could be used.
The absolute minimum white area is as follows:
Rectangle centered on the screen. The lengths of the sides are 70% of the length or the width of the screen.
The white object must be within the rectangle and have an area of at least 10% of the screen.
Note
Make sure there are not bright spots in the rectangle.
(Continued)
Chapter 4 Adjustments and Settings for Recording |