Fitting the WRR-860A (Using a Battery Pack)

1 (1) Attach the WRR tuner fitting (not supplied, service part number: A-8278-057-A) to the back of the camcorder.

1 Pass a screwdriver through the holes and tighten the screws. 2 Loosen the adjustment screws.

3 Adjust the tuner fitting position for a BP-L60A/M50/M100 Battery Pack to be attached, and tighten the adjustment screws to fix its position.

4 Attach the BETACAM holder kit supplied with the tuner.

(2)Attach the battery pack.

5

For more information about attaching the BP-L60A/M50/M100 Battery Pack,

see “5-1-1 Using a Battery Pack” on page 5-1.

 

Back of camcorder

 

BP-L60A/M50/

 

M100

 

Adjustment screws

 

BETACAM

 

holder kit

 

Holes

 

WRR tuner fitting

5-26Chapter 5 Setting Up the Camcorder