The ? mark is displayed to the left of P00 at the top left of the window. In this case, you can change the page.
2Turn the MENU knob until the page which contains the desired file No. appears, and push MENU knob.
3Turn the MENU knob to move the t mark to the desired file No., and then push the MENU knob.
4
The message “MEMORY STICK ACCESS ” appears.
When the loading is completed, the message “COMPLETE!” appears. The camcorder is set up according to the loaded scene file.
For the file No. of the file where no data is stored, NO FILE is displayed in the column of that file.
To cancel the loading
Before pushing the MENU knob in step 3, move the t mark to ESC at the right top of the window by turning the MENU knob and push the MENU knob.
The SCENE FILE page appears again.
Chapter 4 Adjustments and Settings for Recording