• It is possible to automatically rewind and review the last 2 seconds of

1

the recording on the tape for a quick check immediately after shooting.

•Compatible with the Tele-File 1) Memory Label system.

By pressing the RET button on the lens while recording, the timecode valid when you pressed the button is recorded on a MLB-1M-100 memory label (not supplied) attached to the cassette. This is very helpful for management of the cassette tapes and to improve the efficiency of the tape editing.

•The built-in time code generator can be synchronized with an external generator.

•A lithium battery is the back-up power supply for the built-in time code generator enabling the time code to be held for approximately 5 years without charging the camcorder power supply.

•Optional long-life battery packs are available.

•Pressing the VTR START button on the camcorder or the VTR button on the lens ensures recording continuity from the very next frame.

•The time code is displayed in the LCD window screen even when the power is off. The automatic power shut-off function has three time code indication settings.

•The camcorder continuously stores a few seconds of the most recent picture data. Recording is started with this data when the REC button is pressed. This prevents the loss of picture data (Loop Rec function). (This feature is available when an HKDW-703 (not supplied) is attached.)

•The camcorder can shoot pictures at intervals. (This feature is available when an HKDW-703 (not supplied) is attached.)

•A slot-in UHF portable tuner WRR-855A/855B (not supplied) can be attached.

....................................................................................................................................

1)Tele-File

The Tele-File system is a non-contact data reading/writing system. It allows a variety of data to be stored on a 1/2-inch tape label with an non-contact IC memory.

Chapter 1 Overview 1-5