5 Push the MENU knob.
The t mark at the left of LOOP/INTVAL REC changes to a z mark and the z mark at the left of the setting changes to a ? mark.
3
6 Turn the MENU knob clockwise or counterclockwise until LOOP appears.
If you turn the MENU knob clockwise or counterclockwise, the setting changes in the following sequence: OFF y LOOP y A. INT y M. INT.
When LOOP appears, the camcorder is in the Loop Rec mode where picture, sound, and time code are constantly saved in memory. The TALLY lamp (green) is on while the picture data is being stored in the memory.