5-8 Adjusting the Shoulder Pad Position
You can shift the shoulder pad from its center position (factory setting) backward by up to 10 mm (3/8 inch) or forward by up to 25 mm (1 inch). This adjustment helps you get the best balance for shooting with the camcorder on your shoulder.
Bottom
5
Shoulder pad
Adjusting the shoulder pad position
1 Loosen the two screws.
2 Slide the shoulder pad backward or forward until it is in the most convenient position.
3 Tighten the screws.
Note
Do not remove screws instead of loosening them. If you have removed them, be sure to use the screws you removed, or screws of the same length (8 mm). If you fasten the shoulder pad using longer screws, they may damage parts inside the unit.
Chapter 5 Setting Up the Camcorder