4LEVEL (CH-1/CH-2) (audio channel 1 and channel 2 recording level) controls

These controls adjust the audio levels of channels 1 and 2 when audio

input is from the AUDIO IN CH-1/CH-2 connectors and the AUDIO 2 SELECT switches are set to MANUAL.

5AUDIO SELECT (CH-1/CH-2) (audio channel-1 and channel-2

adjustment method select) switches

These switches select the audio level adjustment method for each of audio channels 1 and 2.

AUTO: Select this setting for automatic adjustment.

MANUAL: Select this setting for manual adjustment.

6AUDIO IN CH-1/CH-2 / CH-3/CH-4 (audio input select) switches

AUDIO IN CH-1/CH-2 switches

These switches select the audio input signals to be recorded for audio channels 1 and 2.

FRONT: The input signal source is the microphone connected to the MIC IN connector.

REAR: The input signal source is the audio equipment connected to the AUDIO IN CH-1/CH-2 connectors.

WIRELESS: The input signal source is a WRR-855A/855B UHF Synthesized Tuner Unit (not supplied).

CH-3/CH-4 switches

These switches select the audio input signals to be recorded for audio channels 3 and 4.

Note

To activate CH-3/CH-4 switches, set AUDIO CH3/4 MODE to SW on the VTR MODE 1 page of the MAINTENANCE menu.

F (FRONT): The input signal source is the microphone connected to the MIC IN connector.

R (REAR): The input signal source is the audio equipment connected to the AUDIO IN CH-1/CH-2 connectors.

Chapter 2 Locations and Functions of Parts and Controls

2-7