Note
Do not insert/remove a Memory Stick while the ACCESS lamp is lit or flashing. Doing so may damage the data.
2
2 MENU knob
Use this knob to change the page selection or a setting within the menu. Push: If you push this knob when the arrow (t) is placed at the page title on the menu, the arrow (t) changes to the question mark (?)
and you can change the page.
When the arrow mark is placed at the position other than the page title, the camcorder turns in mode where you can change the settings by pushing this knob.
Turn: Turn this knob to change the page or change the settings of the items.
3STATUS ON/SEL / OFF (menu display on/paging/display off) switch
To enable this switch, set the MENU ON/OFF switch to OFF.
Closing the cover automatically sets the MENU ON/OFF switch to OFF. ON/SEL: Each time this switch is pushed upward, the window to
confirm the menu settings and conditions of the camcorder is displayed on the viewfinder screen. There are three windows, which are switched each time the switch is pushed upward. Each window is displayed for about 10 seconds.
OFF: To clear the page immediately after display, push this switch down to the OFF position.
You can select the confirmation window to be displayed on the menu.
For details, see “Display/don’t display status confirmation windows” on page
Chapter 2 Locations and Functions of Parts and Controls