G-3000H User’s Guide

Figure 45 Layer-2 Isolation Application

MAC addresses that are not listed in the Allow devices with these MAC addresses table are blocked from communicating with the ZyAIR’s wireless clients except for broadcast packets. Layer-2 isolation does not check the traffic between wireless clients that are associated with the same AP. Intra-BSS Traffic allows wireless clients associated with the same AP to communicate with each other.

8.2 Configuring Layer-2 Isolation

If layer-2 isolation is enabled, you need to know the MAC address of the wireless client, AP, computer or router that you want to allow to communicate with the ZyAIR's wireless clients.

To configure layer-2 isolation, click the WIRELESS link under ADVANCED and then the Layer-2 Isolation tab. The screen appears as shown next.

104

Chapter 8 Other Wireless Configurations