G-3000H User’s Guide

Table 71 Menu 16 VLAN Setup

FIELD

DESCRIPTION

 

 

Active

To enable a VLAN mapping profile, press [SPACE BAR] to select Yes and

 

press [ENTER].

ID

Press [SPACE BAR] to select a VLAN ID or enter one from 1 to 4094.

 

Incoming traffic from the WLAN is authorized and assigned a VLAN ID by the

 

RADIUS server before it is sent to the LAN interface of the wireless client.

 

Different SSID profiles can use the same or different VLAN IDs. This allows

 

you to split wireless stations into groups using similar VLAN IDs.

Name

Press [SPACE BAR] to select a name or type a name to have the ZyAIR check

 

for specific VLAN attributes on incoming messages from the RADIUS server.

 

Access-accept packets sent by the RADIUS server contain VLAN related

 

attributes. The configured Name field is checked against these attributes. If

 

the configured Name field matches these attributes, the corresponding VLAN

 

ID entry is used to access the specific VLAN group. If the configured Name

 

field does not match the VLAN related attributes sent from the RADIUS server,

 

a wireless station is assigned the associated SSID VLAN ID. See VLAN ID in

 

the SSID screen.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

196

Chapter 19 VLAN Setup