G-3000H User’s Guide

Table 56 Channel Usage

LABEL

DESCRIPTION

 

 

Network Mode

“Network mode” in this screen refers to your wireless LAN infrastructure (refer

 

to the Wireless LAN chapter) and WEP setup.

 

Network modes are: Infrastructure (same as an extended service set ESS)),

 

Infrastructure with WEP (WEP encryption is enabled), Ad-Hoc(same as an

 

independent basic service set IBSS)), or Ad-Hoc with WEP.

Refresh

Click Refresh to reload the screen.

 

 

14.5 F/W Upload Screen

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a "*.bin" extension, e.g., "zyair.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. See the Firmware and Configuration File Maintenance chapter for upgrading firmware using FTP/TFTP commands.

Click MAINTENANCE and then F/W Upload. Follow the instructions in this screen to upload firmware to your ZyAIR.

Figure 94 Firmware Upload

The following table describes the labels in this screen.

Table 57 Firmware Upload

LABEL

DESCRIPTION

 

 

File Path

Type in the location of the file you want to upload in this field or click Browse ...

 

to find it.

Browse...

Click Browse... to find the .bin file you want to upload. Remember that you must

 

decompress compressed (.zip) files before you can upload them.

Upload

Click Upload to begin the upload process. This process may take up to two

 

minutes.

Note: Do not turn off the ZyAIR while firmware upload is in progress!

166

Chapter 14 Maintenance