331 Enter PASS command Password:
230 Logged in ftp> bin
200 Type I OK
ftp> get
150 Opening data connection for STOR ras
226 File received OK
ftp: 327680 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit
The following table describes some of the commands that you may see in third party FTP clients.
Table 77 General Commands for Third Party FTP Clients
COMMAND | DESCRIPTION |
|
|
Host Address | Enter the address of the host server. |
|
|
Login Type | Anonymous. |
| This is when a user I.D. and password is automatically supplied to the server for |
| anonymous access. Anonymous logins will work only if your ISP or service |
| administrator has enabled this option. |
| Normal. |
| The server requires a unique User ID and Password to login. |
|
|
Transfer Type | Transfer files in either ASCII (plain text format) or in binary mode. |
|
|
Initial Remote | Specify the default remote directory (path). |
Directory |
|
Initial Local Directory | Specify the default local directory (path). |
|
|
The ZyAIR supports the up/downloading of the firmware and the configuration file using TFTP (Trivial File Transfer Protocol) over LAN. Although TFTP should work over WAN as well, it is not recommended.
To use TFTP, your computer must have both telnet and TFTP clients. To backup the configuration file, follow the procedure shown next:
1Use telnet from your computer to connect to the ZyAIR and log in. Because TFTP does not have any security checks, the ZyAIR records the IP address of the telnet client and accepts TFTP requests only from this address.
2Put the SMT in command interpreter (CI) mode by entering 8 in Menu 24 – System Maintenance.
210 | Chapter 23 Firmware and Configuration File Maintenance |