G-3000H User’s Guide

23.4.1 Firmware Upload

FTP is the preferred method for uploading the firmware and configuration. To use this feature, your computer must have an FTP client.

When you telnet into the ZyAIR, you will see the following screens for uploading firmware and the configuration file using FTP.

Figure 144 Menu 24.7.1 System Maintenance: Upload System Firmware

Menu 24.7.1 - System Maintenance - Upload System Firmware

To upload the system firmware, follow the procedure below:

1.Launch the FTP client on your workstation.

2.Type "open" and the IP address of your system. Then type "root" and SMT password as requested.

3.Type "put firmwarefilename ras" where "firmwarefilename" is the name of your firmware upgrade file on your workstation and "ras" is the remote file name on the system.

4.The system reboots automatically after a successful firmware upload.

For details on FTP commands, please consult the documentation of your FTP client program. For details on uploading system firmware using TFTP (note

that you must remain on this menu to upload system firmware using TFTP), please see your manual.

Press ENTER to Exit:

23.4.2 Configuration File Upload

You see the following screen when you telnet into menu 24.7.2.

Figure 145 Menu 24.7.2 System Maintenance: Upload System Configuration File

Menu 24.7.2 - System Maintenance - Upload System Configuration File

To upload

the

system configuration file, follow the procedure below:

 

1.

Launch

the

FTP client on your workstation.

password

2.

Type "open" and the IP address of your system. Then type "root" and SMT

 

as requested.

 

3.Type "put configurationfilename rom-0" where "configurationfilename" is the name of your system configuration file on your workstation, which will be transferred to the "rom-0" file on the system.

4.The system reboots automatically after the upload system configuration file process is complete.

For details on FTP commands, please consult the documentation of your FTP client program. For details on uploading system firmware using TFTP (note that you must remain on this menu to upload system firmware using TFTP), please see your manual.

Press ENTER to Exit:

214

Chapter 23 Firmware and Configuration File Maintenance