ZyXEL Communications G-3000H 6.12.4 Security: 802.1x Dynamic 64-bitWEP, 128-bitWEP

	G-3000H User’s Guide
Table 22 Security: 802.1x Only, 802.1x Static 64-bit WEP, 128-bit WEP
LABEL	DESCRIPTION
Authentication	The authentication database contains wireless station login information. The local
Databases	user database is the built-in database on the ZyAIR. The RADIUS is an external
	server. Use this drop-down list box to select which database the ZyAIR should use
	(first) to authenticate a wireless station.
	Before you specify the priority, make sure you have set up the corresponding
	database correctly first.
	Select Local User Database Only to have the ZyAIR just check the built-in user
	database on the ZyAIR for a wireless station's username and password.
	Select RADIUS Only to have the ZyAIR just check the user database on the
	specified RADIUS server for a wireless station's username and password.
	Select Local first, then RADIUS to have the ZyAIR first check the user database
	on the ZyAIR for a wireless station's username and password. If the user name is
	not found, the ZyAIR then checks the user database on the specified RADIUS
	server.
	Select RADIUS first, then Local to have the ZyAIR first check the user database
	on the specified RADIUS server for a wireless station's username and password. If
	the ZyAIR cannot reach the RADIUS server, the ZyAIR then checks the local user
	database on the ZyAIR. When the user name is not found or password does not
	match in the RADIUS server, the ZyAIR will not check the local user database and
	the authentication fails.
Apply	Click Apply to save your changes back to the ZyAIR.
Reset	Click Reset to begin configuring this screen afresh.

6.12.4 Security: 802.1x Dynamic 64-bit WEP, 128-bit WEP

Select 802.1x Dynamic 64 or 802.1x Dynamic 128 in the Security Mode field to display the following screen.

Figure 34 Security: 802.1x Dynamic 64-bit WEP, 128-bit WEP

The following table describes the labels in this screen.

Table 23 Security: 802.1x Dynamic 64-bit WEP, 128-bit WEP

LABEL	DESCRIPTION
Name	Type a name to identify this security profile.
Security Mode	Choose 802.1x Dynamic 64 or 802.1x Dynamic 128 in this field.

Chapter 6 Wireless Security Configuration 85