|
| |
| Table 26 RADIUS |
|
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| Accounting Server IP | Enter the IP address of the external accounting server in dotted decimal |
| Address | notation. |
| Accounting Server Port | Enter the port number of the external accounting server. The default port |
|
| number is 1813. You need not change this value unless your network |
|
| administrator instructs you to do so with additional information. |
| Share Secret | Enter a password (up to 31 alphanumeric characters) as the key to be shared |
|
| between the external authentication server and the ZyAIR. The key must be |
|
| the same on the external authentication server and your ZyAIR. The key is not |
|
| sent over the network. |
| Apply | Click Apply to save your changes back to the ZyAIR. |
|
|
|
| Reset | Click Reset to begin configuring this screen afresh. |
|
|
|
6.15 Configuring Local User Database
To change your ZyAIR’s local user database, click the WIRELESS link under ADVANCED and then the Local User Database tab. The screen appears as shown.
Figure 38 Local User Database
The following table describes the labels in this screen.
Table 27 Local User Database
LABEL | DESCRIPTION |
|
|
Active | Select this check box to activate the user profile. |
|
|
User Name | Enter the username (up to 31 characters) for this user profile. |
|
|
Password | Type a password (up to 31 characters) for this user profile. Note that as you |
| type a password, the screen displays a (*) for each character you type. |
Apply | Click Apply to save your changes back to the ZyAIR. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
Chapter 6 Wireless Security Configuration | 91 |