G-3000H User’s Guide

5Type a VLAN Group ID. This should be the same as the management VLAN ID on the ZyAIR.

6Enable Tx Tagging on the port which you want to connect to the ZyAIR. Disable Tx Tagging on the port you are using to connect to your computer.

7Under Control, select Fixed to set the port as a member of the VLAN.

Figure 56 VLAN-Aware Switch - Static VLAN

8Click Apply. The following screen displays.

Figure 57 VLAN-Aware Switch

9Click VLAN Status to display the following screen.

Figure 58 VLAN-Aware Switch - VLAN Status

Follow the instructions in the Quick Start Guide to set up your ZyAIR for configuration. The ZyAIR should be connected to the VLAN-aware switch. In the above example, the switch is using port 1 to connect to your computer and port 2 to connect to the ZyAIR: see Figure 55.

1In the ZyAIR web configurator click VLAN under ADVANCED to open the VLAN setup screen.

2Select the Enable VLAN Tagging check box and type a Management VLAN ID (10 in this example) in the field provided.

116

Chapter 9 VLAN