G-3000H User’s Guide

 

Table 79 CNM Commands

 

 

 

 

 

 

COMMAND

SUB COMMAND

DESCRIPTION

 

 

 

 

 

encrymode

 

This command is used to encrypt communications

 

 

 

between the ZyXEL device and the Vantage CNM server.

 

 

<0:NONE

Use this command to set the encryption mode.

 

 

Type 0 to have no encryption, type 1 to have the ZyXEL

 

 

1:DES

device use DES encryption or type 2 to have the ZyXEL

 

 

2:3DES>

device use 3DES encryption.

 

 

 

The ZyXEL device must use the same encryption mode

 

 

 

as the Vantage CNM server.

 

keepalive

 

Keepalive messages are sent to the Vantage CNM server

 

 

 

by the ZyXEL device. They show the connection status

 

 

 

between the ZyXEL device and the Vantage CNM server.

 

 

 

This command displays the time interval in seconds

 

 

 

between the keepalive messages that the ZyXEL device

 

 

 

sends to the Vantage CNM server.

 

 

0

Use this command to disable keepalive message

 

 

sending.

 

 

 

 

 

[seconds]

To set a time interval type the cnm keepalive command

 

 

 

followed by a number from 10 to 655.

 

version

 

This displays the Vantage CNM version.

 

 

 

 

24.1.3 Configuration Example

This is an example allowing Vantage CNM server (on the same subnet as your ZyXEL device) with an IP address of 10.1.1.1, to manage your device. The device and Vantage CNM communicate using DES encryption and a password of “12345678”.

Chapter 24 System Maintenance and Information

223