CHAPTER 12
Remote Management Screens
This chapter provides information on the Remote Management screens.
12.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which ZyAIR interface (if any) from which computers.
You may manage your ZyAIR from a remote location via:
• | Internet (WAN only) | • | ALL (LAN and WAN) |
• | LAN only | • | Neither (Disable). |
To disable remote management of a service, select Disable in the corresponding Server Access field.
You may only have one remote management session running at a time. The ZyAIR automatically disconnects a remote management session of lower priority when another remote management session of higher priority starts. The priorities for the different types of remote management sessions are as follows.
1Telnet
2HTTP
12.1.1Remote Management LimitationsRemote management over LAN or WAN will not work when:
1A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service.
2You have disabled that service in one of the remote management screens.
3The IP address in the Secured Client IP field does not match the client IP address. If it does not match, the ZyAIR will disconnect the session immediately.
4There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time.
Chapter 12 Remote Management Screens | 147 |