G-3000H User’s Guide

23.3.1 Restore Using FTP

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file upload in this chapter.

Figure 142 Menu 24.6 Restore Configuration

Menu 24.6 – Restore Configuration

To transfer the firmware and the configuration file, follow the procedure below:

1.Launch the FTP client on your workstation.

2.Type "open" and the IP address of your router. Then type "root" and SMT password as requested.

3.Type “put backupfilename rom-0” where backupfilename is the name of your backup configuration file on your workstation and rom-spt is the

Remote file name on the router. This restores the configuration to your router.

4. The system reboots automatically after a successful file transfer.

For details on FTP commands, please consult the documentation of your FTP client program. For details on restoring using TFTP (note that you must remain in the menu to back up using TFTP), please see your router manual.

Press ENTER to Exit:

23.4 Uploading Firmware and Configuration Files

Menu 24.7 – System Maintenance – Upload Firmware allows you to upgrade the firmware

and the configuration file.

Note: WARNING! PLEASE WAIT A FEW MINUTES FOR THE ZYAIR TO RESTART AFTER FIRMWARE OR CONFIGURATION FILE UPLOAD. INTERRUPTING THE UPLOAD PROCESS MAY PERMANENTLY DAMAGE YOUR ZYAIR.

Figure 143 Menu 24.7 System Maintenance: Upload Firmware

Menu 24.7 - System Maintenance - Upload Firmware

1.Upload System Firmware

2.Upload System Configuration File

Enter Menu Selection Number:

The configuration data, system-related data, the error log and the trace log are all stored in the configuration file. Please be aware that uploading the configuration file replaces everything contained within.

Chapter 23 Firmware and Configuration File Maintenance

213