|
|
|
|
|
| |
| Table 59 | SMT Menus Overview (continued) |
|
| ||
|
|
|
|
|
| |
| MENUS |
| SUB MENUS |
|
| |
|
|
|
|
| ||
| 24 System Maintenance | 24.1 System Status |
|
| ||
|
|
|
|
|
|
|
|
|
| 24.2 | System Information and | 24.2.1 System Information |
|
|
|
| Console Port Speed |
|
| |
|
|
| 24.2.2 Console Port Speed |
| ||
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| 24.3 | Log and Trace | 24.3.2 Syslog Logging |
|
|
|
|
|
|
|
|
|
|
|
|
| 24.3.4 |
|
|
|
|
|
|
|
|
|
|
| 24.4 | Diagnostic |
|
|
|
|
|
|
|
|
|
|
|
| 24.5 | Backup Configuration |
|
|
|
|
|
|
|
|
|
|
|
| 24.6 | Restore Configuration |
|
|
|
|
|
|
|
|
|
|
|
| 24.7 | Upload Firmware | 24.7.1 Upload System Firmware |
|
|
|
|
|
|
|
|
|
|
|
|
| 24.7.2 Upload System Configuration |
|
|
|
|
|
| File |
|
|
|
| 24.8 | Command Interpreter Mode |
|
|
|
|
|
|
|
| |
|
|
| 24.10 Time and Date Setting |
|
| |
|
|
|
|
|
| |
|
|
| 24.11 Remote Management Setup |
|
| |
|
|
|
|
|
|
|
15.4 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your ZyAIR.
Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.
Table 60 Main Menu Commands
OPERATION | KEYSTROKE | DESCRIPTION |
|
|
|
Move down to | [ENTER] | To move forward to a submenu, type in the number of the |
another menu |
| desired submenu and press [ENTER]. |
Move up to a | [ESC] | Press [ESC] to move back to the previous menu. |
previous menu |
|
|
Move to a “hidden” | Press [SPACE BAR] | Fields beginning with “Edit” lead to hidden menus and |
menu | to change No to Yes | have a default setting of No. Press [SPACE BAR] once to |
| then press [ENTER]. | change No to Yes, then press [ENTER] to go to the |
|
| “hidden” menu. |
Move the cursor | [ENTER] or [UP]/ | Within a menu, press [ENTER] to move to the next field. |
| [DOWN] arrow keys. | You can also use the [UP]/[DOWN] arrow keys to move to |
|
| the previous and the next field, respectively. |
Entering information | Type in or press | You need to fill in two types of fields. The first requires you |
| [SPACE BAR], then | to type in the appropriate information. The second allows |
| press [ENTER]. | you to cycle through the available choices by pressing |
|
| [SPACE BAR]. |
Chapter 15 Introducing the SMT | 173 |