CHAPTER 15
Introducing the SMT
This chapter describes how to access the SMT and provides an overview of its menus.
15.1 Connect to your ZyAIR Using Telnet
The following procedure details how to telnet into your ZyAIR.
1In Windows, click Start (usually in the bottom left corner), Run and then type “telnet 192.168.1.2” (the default IP address) and click OK.
2For your first login, enter the default password “1234”. As you type the password, the screen displays an asterisk “*” for each character you type.
Figure 104 Login Screen
Password : xxxx
3After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period) after you log in, your ZyAIR will automatically log you out. You will then have to telnet into the ZyAIR again. You can use the web configurator or the CI commands to change the inactivity time out period.
15.2 Changing the System Password
Change the ZyAIR default password by following the steps shown next.
1From the main menu, enter 23 to display Menu 23 – System Security.
2Enter 1 to display Menu 23.1 – System Security – Change Password as shown next.
3Type your existing system password in the Old Password field, and press [ENTER].
Chapter 15 Introducing the SMT | 171 |