G-3000H User’s Guide

Figure 138 System Maintenance: Backup Configuration

Ready to backup Configuration via Xmodem.

Do you want to continue (y/n):

2The following screen indicates that the Xmodem download has started.

Figure 139 System Maintenance: Starting Xmodem Download Screen

You can enter ctrl-x to terminate operation any time.

Starting XMODEM download...

3Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the following screen.

Figure 140 Backup Configuration Example

Type a location for storing the configuration file or click Browse to look for one.

Choose the

Xmodem protocol.

Then click Receive.

4After a successful backup you will see the following screen. Press any key to return to the SMT menu.

Figure 141 Successful Backup Confirmation Screen

**Backup Configuration completed. OK.

### Hit any key to continue.###

23.3Restore Configuration

Menu 24.6 –- System Maintenance Restore Configuration allows you to restore the configuration via FTP or TFTP to your ZyAIR. The preferred method is FTP. Note that this function erases the current configuration before restoring the previous backup configuration; please do not attempt to restore unless you have a backup configuration stored on disk. To restore configuration using FTP or TFTP is the same as uploading the configuration file, please refer to the following sections on FTP and TFTP file transfer for more details. The ZyAIR restarts automatically after the file transfer is complete.

212

Chapter 23 Firmware and Configuration File Maintenance