G-3000H User’s Guide

 

Figure 113 Menu 3.5 Wireless LAN Setup

 

 

 

 

Menu 3.5 - Wireless LAN Setup

 

Operating Mode= MESSID

Edit MAC Address Filter= No

 

Edit Roaming Configuration= Yes

 

Hide Name (SSID)= No

Edit SSID Profile= No

 

Select SSID Profile= N/A

 

Channel ID= CH06 2437MHz

Edit Bridge Link Configuration= No

 

RTS Threshold= 2432

Preamble= Long

 

Frag. Threshold= 2432

802.11 Mode= Mixed

 

 

Max. Frame Burst= 650

 

 

Breathing LED= Yes

 

 

Block Intra-BSS Traffic= No

 

 

Output Power= <11b>15dBm/<11g>11dBm

 

 

Edit Layer-2 Isolation= No

 

Press ENTER to Confirm or ESC to Cancel:

 

Press Space Bar to Toggle.

 

3Move the cursor to the Edit Roaming Configuration field. Press [SPACE BAR] to select Yes and then press [ENTER]. Menu 3.5.2 – Roaming Configuration displays as shown next.

Figure 114 Menu 3.5.2 Roaming Configuration

Menu 3.5.2 - Roaming Configuration

Active= Yes

Port #= 3517

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

The following table describes the fields in this menu.

Table 66 Menu 3.5.2 Roaming Configuration

FIELD

DESCRIPTION

 

 

Active

Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on the

 

ZyAIR if you have two or more ZyAIRs on the same subnet.

Port #

Type the port number to communicate roaming information between access

 

points. The port number must be the same on all access points. The default is

 

3517. Make sure this port is not used by other services.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Chapter 17 LAN Setup

185