G-3000H User’s Guide

Figure 153

CNM CL

 

 

 

 

 

G-3000H>cnm

managerIp

debug

active

sgid

reset

simulate

encrykey

encrymode

G-3000H>

 

 

 

The following table describes the commands in this screen. All commands begin with “cnm” so for example, type “cnm active 1” to enable Vantage CNM on your device.

Table 79 CNM Commands

COMMAND

SUB COMMAND

DESCRIPTION

 

 

 

active

<0:Disable

This displays the ZyXEL device connection status with

 

1:Enable CNM via WAN

Vantage CNM and displays the last date and time that the

 

2:Enable CNM via WAN

ZyXEL device registered with the Vantage CNM server.

 

or LAN>

If Vantage CNM is disabled on the ZyXEL device, active

 

 

0 is displayed.

 

 

If Vantage CNM is enabled on the ZyXEL device using a

 

 

WAN connection, active 1 is displayed.

 

 

If Vantage CNM is enabled on the ZyXEL device using a

 

 

WAN or LAN connection, active 2 is displayed.

 

0

Use this command to disable Vantage CNM on your

 

ZyXEL device.

 

1

Use this command to enable Vantage CNM on your

 

ZyXEL device using a WAN connection.

 

2

Use this command to enable Vantage CNM on your

 

ZyXEL device using a WAN or LAN connection.

 

Last Register Time: 0-0-0

For example if Last Register Time 2004-11-20 10:34:23 is

 

0:0:0

displayed then the last date the device registered with

 

 

Vantage CNM was the 20th November 2003 at 10:34 PM.

 

 

The last register time displays the last date (year-month-

 

 

date) and time (hours : minutes : seconds) that the ZyXEL

 

 

device registered with Vantage CNM. It displays all

 

 

zeroes if it has not yet registered with the Vantage CNM

 

 

server.

sgid

 

This command displays your ZyXEL device’s unique ID in

 

 

Vantage CNM.

Chapter 24 System Maintenance and Information

221