Figure 85 Remote Management: FTP
The following table describes the labels in this screen.
Table 47 Remote Management: FTP
LABEL | DESCRIPTION |
|
|
Server Port | You may change the server port number for a service if needed, however you must |
| use the same port number in order to use that service for remote management. |
Server Access | Select the interface(s) through which a computer may access the ZyAIR using this |
| service. |
Secured Client IP | A secured client is a “trusted” computer that is allowed to communicate with the |
Address | ZyAIR using this service. |
| Select All to allow any computer to access the ZyAIR using this service. |
| Choose Selected to just allow the computer with the IP address that you specify to |
| access the ZyAIR using this service. |
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
12.6 SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging management information between network devices. SNMP is a member of the TCP/IP protocol suite. Your ZyAIR supports SNMP agent functionality, which allows a manager station to manage and monitor the ZyAIR through the network. The ZyAIR supports SNMP version one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an SNMP management operation. SNMP is only available if TCP/IP is configured.
Note: SNMP is only available if TCP/IP is configured.
152 | Chapter 12 Remote Management Screens |