Use sys logs category followed by a log category and a parameter to decide what to record Table 113 Log Categories and Available Settings
| LOG CATEGORIES | AVAILABLE PARAMETERS |
|
|
|
error |
| 0, 1, 2, 3 |
|
|
|
mten |
| 0, 1 |
|
|
|
Use | 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only | |
alerts for that category, and 3 to record both logs and alerts for that category. | ||
Use the sys logs save command to store the settings in the ZyAIR (you must do this in order to record logs).
Displaying LogsUse the sys logs display command to show all of the logs in the ZyAIR’s log.
Use the sys logs category display command to show the log settings for all of the log categories.
Use the sys logs display [log category] command to show the logs in an individual ZyAIR log category.
Use the sys logs clear command to erase all of the ZyAIR’s logs.
Log Command Example
This example shows how to set the ZyAIR to record the error logs and alerts and then view the results.
ras> | sys logs load |
|
|
|
|
ras> | sys logs category error 3 |
|
|
| |
ras> | sys logs save |
|
|
|
|
ras> | sys logs display access |
|
|
| |
#. | time | source | destination | notes | message |
0 | 11/11/2002 15:10:12 172.22.3.80:137 | 172.22.255.255:137 | ACCESS | BLOCK | |
|
|
|
|
|
|
Appendix J Log Descriptions | 279 |