G-3000H User’s Guide

Table 80 System Maintenance: Time and Date Setting

FIELDDESCRIPTION

End Date

If using daylight savings time, enter the month and day that it ends on

Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to Cancel“ to save your configuration, or press [ESC] to cancel.

24.2.1 Resetting the Time

The ZyAIR resets the time in three instances:

1On leaving menu 24.10 after making changes.

2When the ZyAIR starts up, if there is a timeserver configured in menu 24.10.

324-hour intervals after starting.

24.3Remote Management Setup

24.3.1 Telnet

You can configure your ZyAIR for remote Telnet access as shown next.

Figure 156 Telnet Configuration on a TCP/IP Network24.3.2 FTP

You can upload and download ZyAIR firmware and configuration files using FTP. To use this feature, your computer must have an FTP client.

226

Chapter 24 System Maintenance and Information