Appendix J
Log Descriptions
This appendix provides descriptions of example log messages.
Table 110 System Maintenance Logs
LOG MESSAGE | DESCRIPTION |
|
|
Time calibration is | The router has adjusted its time based on information from the time |
successful | server. |
Time calibration failed | The router failed to get information from the time server. |
DHCP client gets %s | A DHCP client got a new IP address from the DHCP server. |
DHCP client IP expired | A DHCP client's IP address has expired. |
DHCP server assigns %s | The DHCP server assigned an IP address to a client. |
SMT Login Successfully | Someone has logged on to the router's SMT interface. |
SMT Login Fail | Someone has failed to log on to the router's SMT interface. |
WEB Login Successfully | Someone has logged on to the router's web configurator interface. |
WEB Login Fail | Someone has failed to log on to the router's web configurator |
| interface. |
TELNET Login Successfully | Someone has logged on to the router via telnet. |
TELNET Login Fail | Someone has failed to log on to the router via telnet. |
FTP Login Successfully | Someone has logged on to the router via FTP. |
FTP Login Fail | Someone has failed to log on to the router via FTP. |
TYPE | CODE | DESCRIPTION |
|
|
|
0 |
| Echo Reply |
| 0 | Echo reply message |
3 |
| Destination Unreachable |
| 0 | Net unreachable |
| 1 | Host unreachable |
| 2 | Protocol unreachable |
| 3 | Port unreachable |
| 4 | A packet that needed fragmentation was dropped because it was set to Don't |
|
| Fragment (DF) |
| 5 | Source route failed |
4 |
| Source Quench |
| 0 | A gateway may discard internet datagrams if it does not have the buffer space |
|
| needed to queue the datagrams for output to the next network on the route to the |
|
| destination network. |
5 |
| Redirect |
Appendix J Log Descriptions | 277 |