G-3000H User’s Guide

 

Table 21 Security: WEP

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

WEP Encryption

Select Disable to allow wireless stations to communicate with the access points

 

 

without any data encryption.

 

 

Select 64-bit WEP or 128-bit WEP to enable data encryption.

 

 

 

 

Authentication

Select Auto, Open System or Shared Key from the drop-down list box.

 

Method

The default setting is Auto.

 

 

 

 

 

 

ASCII

Select this option to enter ASCII characters as the WEP keys.

 

 

 

 

Hex

Select this option to enter hexadecimal characters as the WEP keys.

 

 

The preceding “0x” is entered automatically.

 

 

 

 

Key 1 to

The WEP keys are used to encrypt data. Both the ZyAIR and the wireless stations

 

Key 4

must use the same WEP key for data transmission.

 

If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal

 

 

 

 

characters ("0-9", "A-F").

 

 

If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal

 

 

characters ("0-9", "A-F").

 

 

You must configure all four keys, but only one key can be activated at any one

 

 

time. The default key is key 1.

 

Apply

Click Apply to save your changes back to the ZyAIR.

 

 

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

6.12.3 Security: 802.1x Only, 802.1x Static 64-bit WEP, 128-bit WEP

Select 802.1x Only, 802.1x Static 64 or 802.1x Static 128 in the Security Mode field to display the following screen.

Chapter 6 Wireless Security Configuration

83