Figure 84 Remote Management: Telnet
The following table describes the labels in this screen.
Table 46 Remote Management: Telnet
LABEL | DESCRIPTION |
|
|
Server Port | You may change the server port number for a service if needed, however you must |
| use the same port number in order to use that service for remote management. |
Server Access | Select the interface(s) through which a computer may access the ZyAIR using this |
| service. |
Secured Client IP | A secured client is a “trusted” computer that is allowed to communicate with the |
Address | ZyAIR using this service. |
| Select All to allow any computer to access the ZyAIR using this service. |
| Choose Selected to just allow the computer with the IP address that you specify to |
| access the ZyAIR using this service. |
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
12.5 Configuring FTP
You can upload and download the ZyAIR’s firmware and configuration files using FTP, please see the chapter on firmware and configuration file maintenance for details. To use this feature, your computer must have an FTP client.
To change your ZyAIR’s FTP settings, click REMOTE MGMT, then the FTP tab. The screen appears as shown.
Chapter 12 Remote Management Screens | 151 |