G-3000H User’s Guide

Table 7 System General Setup

LABEL

DESCRIPTION

 

 

Administrator

Type how many minutes a management session (either via the web

Inactivity Timer

configurator or SMT) can be left idle before the session times out.

 

The default is 5 minutes. After it times out you have to log in with your

 

password again. Very long idle timeouts may have security risks.

 

A value of "0" means a management session never times out, no matter how

 

long it has been left idle (not recommended).

System DNS Servers

 

 

 

First DNS Server

Select From DHCP if your DHCP server dynamically assigns DNS server

Second DNS Server

information (and the ZyAIR's Ethernet IP address). The field to the right

displays the (read-only) DNS server IP address that the DHCP assigns.

Third DNS Server

Select User-Definedif you have the IP address of a DNS server. Enter the

 

 

DNS server's IP address in the field to the right. If you chose User-Defined, but

 

leave the IP address set to 0.0.0.0, User-Definedchanges to None after you

 

click Apply. If you set a second choice to User-Defined, and enter the same IP

 

address, the second User-Definedchanges to None after you click Apply.

 

Select None if you do not want to configure DNS servers. If you do not

 

configure a DNS server, you must know the IP address of a machine in order to

 

access it.

 

The default setting is None.

 

 

Apply

Click Apply to save your changes back to the ZyAIR.

 

 

Reset

Click Reset to reload the previous configuration for this screen.

 

 

4.3 Configuring Password

To change your ZyAIR’s password (recommended), click the SYSTEM link under ADVANCED and then the Password tab. The screen appears as shown. This screen allows you to change the ZyAIR’s password.

If you forget your password (or the ZyAIR IP address), you will need to reset the ZyAIR. See the Resetting the ZyAIR section for details

52

Chapter 4 System Screens