Figure 33 Security: 802.1x Only, 802.1x Static
The following table describes the labels in this screen.
Table 22 Security: 802.1x Only, 802.1x Static
LABEL | DESCRIPTION |
|
|
Name | Type a name to identify this security profile. |
|
|
Security Mode | Choose 802.1x Only, 802.1x Static 64 or 802.1x Static 128 in this field. |
|
|
ASCII | Select this option to enter ASCII characters as the WEP keys. |
|
|
Hex | Select this option to enter hexadecimal characters as the WEP keys.The preceding |
| “0x” is entered automatically. |
Key 1 to Key 4 | If you chose |
| (ASCII string) or 10 hexadecimal characters |
| key. |
| If you chose |
| (ASCII string) or 26 hexadecimal characters |
| key. |
| There are four data encryption keys to secure your data from eavesdropping by |
| unauthorized wireless users. The values for the keys must be set up exactly the |
| same on the access points as they are on the wireless stations. |
| The preceding “0x” is entered automatically. You must configure all four keys, but |
| only one key can be activated at any one time. The default key is key 1. |
ReAuthentication | Specify how often wireless stations have to resend user names and passwords in |
Timer | order to stay connected. |
| Enter a time interval between 10 and 9999 seconds. The default time interval is |
| 1800 seconds (30 minutes). |
| Note: If wireless station authentication is done using a RADIUS |
| server, the reauthentication timer on the RADIUS server has |
| priority. |
|
|
Idle Timeout | The ZyAIR automatically disconnects a wireless station from the wired network |
| after a period of inactivity. The wireless station needs to enter the user name and |
| password again before access to the wired network is allowed. |
| The default time interval is 3600 seconds (or 1 hour). |
|
|
84 | Chapter 6 Wireless Security Configuration |