ZyXEL Communications G-3000H Table, Table 112 Sys log, Configuring What You Want the ZyAIR to Log

G-3000H User’s Guide

Table 111 ICMP Notes (continued)

TYPE	CODE	DESCRIPTION
	0	Redirect datagrams for the Network
	1	Redirect datagrams for the Host
	2	Redirect datagrams for the Type of Service and Network
	3	Redirect datagrams for the Type of Service and Host
8		Echo
	0	Echo message
11		Time Exceeded
	0	Time to live exceeded in transit
	1	Fragment reassembly time exceeded
12		Parameter Problem
	0	Pointer indicates the error
13		Timestamp
	0	Timestamp request message
14		Timestamp Reply
	0	Timestamp reply message
15		Information Request
	0	Information request message
16		Information Reply
	0	Information reply message

Table 112 Sys log

LOG MESSAGE	DESCRIPTION
Mon dd hr:mm:ss hostname	This message is sent by the "RAS" when this syslog is
src="<srcIP:srcPort>"	generated. The messages and notes are defined in this
dst="<dstIP:dstPort>"	appendix’s other charts.
msg="<msg>" note="<note>"

Log Commands

Go to the command interpreter interface (the Command Interpreter appendix explains how to access and use the commands).

Configuring What You Want the ZyAIR to Log

Use the sys logs load command to load the log setting buffer that allows you to configure which logs the ZyAIR is to record.

278 Appendix J Log Descriptions