Figure 23 Bridge Loop: Two Bridges Connected to Hub
If your ZyAIR (in bridge mode) is connected to a wired LAN while communicating with another wireless bridge that is also connected to the same wired LAN as shown next.
Figure 24 Bridge Loop: Bridge Connected to Wired LAN
To prevent bridge loops, ensure that you enable STP in the Wireless screen or your ZyAIR is not set to bridge mode while connected to both wired and wireless segments of the same LAN.
Click the WIRELESS link under ADVANCED. Select Bridge/Repeater as the Operating Mode to have the ZyAIR act as a wireless bridge only.
68 | Chapter 5 Wireless Configuration |