ZyXEL Communications HW-D Series, P-662H 7.5.3 WPA(2)-PSK

P-662H/HW-D Series User’s Guide

Figure 64 Wireless: Static WEP Encryption

The following table describes the wireless LAN security labels in this screen.

Table 39 Wireless: Static WEP Encryption

LABEL	DESCRIPTION
Security Mode	Choose Static WEP from the drop-down list box.
Passphrase	Enter a Passphrase (up to 32 printable characters) and click Generate. The ZyXEL
	Device automatically generates a WEP key.
WEP Key	The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
	stations must use the same WEP key for data transmission.
	If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII
	string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or
	256-bit WEP key respectively.
Apply	Click Apply to save your changes back to the ZyXEL Device.
Cancel	Click Cancel to reload the previous configuration for this screen.
Advanced	Click Advanced Setup to display the Wireless Advanced Setup screen and edit
Setup	more details of your WLAN setup.

7.5.3 WPA(2)-PSK

In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless LAN to display the General screen. Select WPA-PSKor WPA2-PSKfrom the Security Mode list.

130 Chapter 7 Wireless LAN