Table 41 Wireless: WPA(2)
LABEL | DESCRIPTION |
|
|
Cancel | Click Cancel to reload the previous configuration for this screen. |
|
|
Advanced Setup | Click Advanced Setup to display the Wireless Advanced Setup screen and |
| edit more details of your WLAN setup. |
To configure advanced wireless settings, click the Advanced Setup button in the General screen. The screen appears as shown.
Figure 67 AdvancedThe following table describes the labels in this screen.
Table 42 Wireless LAN: Advanced
LABEL | DESCRIPTION |
|
|
Wireless Advanced Setup | |
|
|
RTS/CTS | Enter a value between 0 and 2432. If you select the Enable 802.11g+ mode |
Threshold | checkbox, this field is grayed out and the ZyXEL Device uses 4096 automatically. |
Fragmentation | It is the maximum data fragment size that can be sent. Enter a value between 256 and |
Threshold | 2432. If you select the Enable 802.11g+ mode checkbox, this field is grayed out and |
| the ZyXEL Device uses 4096 automatically. |
Output Power | Set the output power of the ZyXEL Device in this field. This control changes the |
| strength of the ZyXEL Device’s antenna gain or transmission power. Antenna gain is |
| the increase in coverage. Higher antenna gain improves the range of the signal for |
| better communications. If there is a high density of APs within an area, decrease the |
| output power of the ZyXEL Device to reduce interference with other APs. |
| The options are Maximum, Middle and Minimum. |
|
|
Preamble | Select a preamble type from the |
| Dynamic. The default setting is Long. See the section on preamble for more |
| information. |
134 | Chapter 7 Wireless LAN |