P-662H/HW-D Series User’s Guide

Table 167 Firewall Commands (continued)

 

 

 

 

FUNCTION

COMMAND

DESCRIPTION

 

 

 

 

config edit firewall set <set

This command sets the rule to have the

 

#> rule <rule #> destaddr-

ZyXEL Device check for traffic with this

 

single <ip address>

individual destination address.

 

 

 

 

config edit firewall set <set

This command sets a rule to have the ZyXEL

 

#> rule <rule #> destaddr-

Device check for traffic with a particular

 

subnet <ip address> <subnet

subnet destination (defined by IP address and

 

mask>

subnet mask).

 

 

 

 

 

 

config edit firewall set <set

This command sets a rule to have the ZyXEL

 

#> rule <rule #> destaddr-

Device check for traffic going to this range of

 

range <start ip address> <end

addresses.

 

ip address>

 

 

 

 

 

config edit firewall set <set

This command sets a rule to have the ZyXEL

 

#> rule <rule #> TCP destport-

Device check for TCP traffic with this

 

single <port #>

destination address. You may repeat this

 

 

command to enter various, non-consecutive

 

 

port numbers.

 

 

 

 

config edit firewall set <set

This command sets a rule to have the ZyXEL

 

#> rule <rule #> TCP destport-

Device check for TCP traffic with a destination

 

range <start port #> <end port

port in this range.

 

#>

 

 

 

 

 

config edit firewall set <set

This command sets a rule to have the ZyXEL

 

#> rule <rule #> UDP destport-

Device check for UDP traffic with this

 

single <port #>

destination address. You may repeat this

 

 

command to enter various, non-consecutive

 

 

port numbers.

 

 

 

 

config edit firewall set <set

This command sets a rule to have the ZyXEL

 

#> rule <rule #> UDP destport-

Device check for UDP traffic with a destination

 

range <start port #> <end port

port in this range.

 

#>

 

 

 

 

Delete

 

 

 

 

 

 

config delete firewall e-mail

This command removes all of the settings for

 

 

e-mail alert.

 

 

 

 

config delete firewall attack

This command resets all of the attack

 

 

response settings to their defaults.

 

 

 

 

config delete firewall set

This command removes the specified set from

 

<set #>

the firewall configuration.

Appendix K Firewall Commands

431