P-662H/HW-D Series User’s Guide

Table 139 Firmware Upgrade (continued)

LABEL

DESCRIPTION

 

 

Browse...

Click Browse... to find the .bin file you want to upload. Remember that you must

 

decompress compressed (.zip) files before you can upload them.

Upload

Click Upload to begin the upload process. This process may take up to two

 

minutes.

Note: Do NOT turn off the ZyXEL Device while firmware upload is in progress!

After you see the Firmware Upload in Progress screen, wait two minutes before logging into the ZyXEL Device again.

Figure 194 Firmware Upload In Progress

The ZyXEL Device automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 195 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the Status screen.

If the upload was not successful, the following screen will appear. Click Return to go back to the Firmware screen.

346

Chapter 25 Tools